RETIRED
40mm 1150W SDS-MAX Brushless Rotary Hammer (RETIRED)
DH40MEY(G1Z)
Highest Demolition Performance and Fastest Drilling Speed in its class
Product Info
Product Info
- Industry first AC Brushless Motor. Unique Maintenance-free Brushless motor provides significantly longer life. No carbon brush replacement required. None of the traditional problems from conventional brushed commutator motors
- Stable Performance under voltage drop situations. Unlike conventional electric Rotary hammers, drilling performance isn't affected as much by voltage drop from long extension leads on site.
- Example: 100mm extension load, 2.0mm² conductor. Performance of conventional models drop by approximately 14%, new Brushless models decrease by just 3%.
- Stable Performance when used with Generators. Brushless design operates consistently and without the traditional problems cause by generator use. Requires suitably sized Generator output.
- Fastest Drill speed in its class - Up to 20% faster*
- Highest Demolition Performance in its class - Up to 40% high performance*
- Ultra low vibration due to original, spring-type dynamic vibration absorber & vibration absorbing side-handle - Approx. 15% lower vibration value*
- Original, spring-type dynamic vibration absorber with a weight and two springs moves in the opposite direction to the vibration direction of the main body. This results in reduced vibration and improved operating efficiency.
- Aluminium Housing Body (AHB) provides a super strong aluminium die-cast body with internal double-insulation making the housing more rigid, significantly enhancing durability of the motor unit.
- Improved handling with constant speed control & 4-stage electronic switching to adjust the drilling speed and impact rate
- One-touch quick change SDS MAX chuck
- Large change lever & trigger switch - easy to operate wearing gloves
- 2-mode – Hammer only and Hammer Drilling
- Variable lock mechanism allows 12 different chisel angles (hammer only)
- *A comparison of the model DH40MEY(G1) and the previous model DH40MRY. The results may vary depending on operating conditions.
Product Specs
Product Specs
Capacity | Masonry | 40mm (drill bit) |
105mm (core bit) | ||
Bit Shank | SDS MAX | |
Power Input | 1,150W | |
No Load Speed | 250 - 500/min | |
Full Load Impact Rate | 1,430 - 2,850/min | |
Impact Energy Per Stroke | 11.0 Joules | |
Vibration Total Values (triax vector sum) | Hammer drilling into concrete | Vibration emission value : ah, HD = 8.0m/s2 Uncertainty K = 1.5 m/s2 |
Equivalent chiselling value | Vibration emission value : ah, CHeq = 7.3m/s2 Uncertainty K = 1.5m/s2 | |
Overall Length | 477mm | |
Weight | 7.5kg | |
Standard Accessories | Side handle | |
Depth gauge | ||
Carry case | ||
(Supplied without pictured drill bit) | ||
(The tri-axial vibration values were measured according to EN60745-2-6) |
Documents
Manuals
- User Manual download here
Recommended Tool Maintenance
We recommend a regular ongoing tool maintenance for this power tool. To see HiKOKI’s recommended service intervals and maintenance requirements.
Ratings & Reviews
5.00 Average
Rated 5.00 out of 5 based on 1 customer rating
1 review for 40mm 1150W SDS-MAX Brushless Rotary Hammer (RETIRED)
Add a review Cancel reply
You must be logged in to post a review.
Recommended
Recent Posts
- Get to know your Fan-cooled Rapid Charger
- The Importance of Regular Power Tool Servicing
- HiKOKI supporting our future Tradespeople
- End of Life – Recycling and Disposal of your HiKOKI Power Tools
- Understanding Hand Arm Vibration Syndrome (HAVS), Vibration White Finger (VWF) & Ways to Minimise the Risk.
Recent Comments
- evagnz on 36V High Powered Brushless 125mm Angle Grinder Kit
- Tony Willis on 18V LED Utility Light Bare Tool RETIRED
- Eva on 18V Planer Bare Tool
- Darren on 36V High Powered 125mm Angle Grinder Kit (RETIRED)
- Brendon on 18V Gasless 90mm Framing Nailer Kit (RETIRED)
Deane –
Brilliant machine… Being AC brushless I could use this off a longer than normal lead without risking burnout. Highly recommend .